P/N :

 

LM324 consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies also is possible if the difference between the two supplies is 3 V to 32 V (3 V to 26 V for the LM2902 device), and V CC is at least 1.5 V more positive than the input common-mode voltage.

 

Image

LM324 datasheet op amp

 

 

 

Pinout

 

LM324 DatasheetLM324 Datasheet



The low supply-current drain is independent of the magnitude of the supply voltage. Applications include transducer amplifiers, dc amplification blocks, and all the conventional operational-amplifier circuits that now can be more easily implemented in single-supply-voltage systems.

For example, the LM124 device can be operated directly from the standard 5-V supply that is used in digital systems and provides the required interface electronics, without requiring additional ±15-V supplies.

 

 

 

 

Related partnumber

LM324, LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV


Datasheet Information Link :

 

http://www.ti.com/lit/ds/symlink/lm224.pdf

 

http://www.fairchildsemi.com/ds/LM/LM324.pdf


http://www.onsemi.com/pub_link/Collateral/LM324-D.PDF


http://rohmfs.rohm.com/en/products/databook/datasheet/ic/amp_linear/opamp/op_now-e.pdf


http://www.st.com/web/en/resource/technical/document/datasheet/CD00001046.pdf

 

P/N :
Posted by Datasheet
P/N :

The OPA695 is a very high bandwidth, current-feedback op amp that combines an exceptional 4300V/µs slew rate and a low input voltage noise to deliver a precision, low-cost, high dynamic range Intermediate Frequency (IF) amplifier.

Optimized for high gain operation, the OPA695 is ideally suited to buffering Surface Acoustic Wave (SAW) filters in an IF strip or delivering high output power at low distortion for cable-modem upstream line drivers.

 

Features

  • GAIN = +2 BANDWIDTH (1400MHz)
  • GAIN = +8 BANDWIDTH (450MHz)
  • OUTPUT VOLTAGE SWING: ±4.2V
  • ULTRA-HIGH SLEW RATE: 4300V/µs
  •  

    Image and block diagram

    OPA695 Datasheet

                 

    Pinout information

     

    Official site :

    http://www.ti.com/product/opa695

     

    P/N :
    Posted by Datasheet